Servicing all of South Florida including West Palm, Broward, Dade, and Monroe Counties

Serco S2000 Ultra Seal w/ head curtain

The ULTRA-SEAL® Foam Dock Seal with Head Curtain utilizes the same versatile design with the addition of an adjustable head curtain that enhances the seal’s effectiveness by accommodating a variety of trailer heights.

Design Highlights
  • Standard Base Projection: 10″
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • 5 to 6 Internal Retention Straps Per Side Pad
  • Includes 30″ High Reinforcement on Tip at Bottom Of Side Pad Profile
  • Includes Bottom Foam-filled Draft Pads
  • Available for Door Widths Up to 10′-0″
  • Seals Hinge Air Gap on Trailers with Swing-out Doors & Provides Improved Trailer Access
  • Includes Dual Color Guide Stripe System: Inside Stripe is White and 16″ High x 3″ Wide; Outside Stripe is Yellow and 24″ High x 3″ Wide

Serco S600 Dock Seal w/ fixed head pad

Ideal for smaller doors (9′ wide x 9′ high or less), the Foam Dock Seal with Head Pad model provides a positive seal between internal and external environments. It seals automatically as the vehicle is backed against the foam pads. Built of heavy-duty construction including roll-formed Serco SteelT galvanized steel, it offers long life with minimal maintenance.

Design Highlights
  • Standard Base Projection: 10″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Unit Projection Should Not Exceed Twice the Size of Side Pad Backing
  • See Bracket Chart for Bracket Selection
  • 114″ Minimum Unit Width Recommended
  • 93″ Clear Opening Recommended for Cold Storage Applications – Increase Unit Width by 3″
  • Increase “Standard” Unit Height by 6″ When 14’ Trucks Are Present (Western States)

Serco S3000L L-Pad Dock Seal

Whether your trailer is 8′ or 8′ 6″ Wide, the, the L-Shaped Side Pad Foam Dock Seal with Head Pad provides full-width access to the vehicle when docked at doors up to 9′ high. Extremely versatile, it features a compression foam head pad with L-shaped side pads and rugged, roll-formed Serco Steel galvanized steel framing. The side pads are equipped with triangular-shaped foam wedges that support the “L-shape” of the side pads.

Design Highlights
  • Standard Side Pad Base Projection: 16″
  • Standard Head Member Base Projection: 12″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Available for Door Sizes Up to 10′-0″ Wide
  • Side Pads Include Two Triangular Support Wedges & Bottom Draft Pads
  • Standard Side Pad Penetration: 12″
  • Maximum Side Pad Projection: 24″
  • Standard 4″ Projection Difference Between Side Pads & Head Member Must Be Maintained for Correct Product Application
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Serco S800 Dock Seal w/ adjustable head pad

Offering excellent sealing on a full range of trailer heights, the patented Foam Dock Seal with Adjustable Head Pad model features a manually adjustable head pad that allows you to position the head pad on a 48″ vertical track. A standard 18″ high foam head pad is mounted on a heavy gauge steel pan.

Rugged, roll-formed Serco Steel™ galvanized steel framing increases product durability.

Design Highlights
  • Standard Base Projection: 10″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Unit Projection Should Not Exceed Twice the Size of Side Pad Backing
  • See Bracket Chart for Bracket Selection
  • 114″ Minimum Unit Width Recommended
  • 93″ Clear Opening Recommended for Cold Storage Applications – Increase Unit Width by 3″
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Serco S700 Dock Seal w/ head curtain

A hood-style head curtainseals the rear of the vehicle, accommodating a variety of vehicle heights. The Foam Dock Seal with Head Curtain model is ideal for doors that are 9′ high or taller. End caps secure the drop curtain to the side pads. Durable fiberglass stays provide stiffness in the top of the curtain for better moisture drainage.

Rugged, roll-formed Serco Steel™ galvanized steel framing increases product durability. Seamless aluminum tubing provides support for the head curtain.

Design Highlights
  • Pre-wired power unit with UL approved control components
  • Power unit internally mounted
  • Available in 1 1/2 hp three-phase or 3/4 hp single-phase with 24V AC control valve
  • Self-lubricating composite bearings
  • Velocity fuses on all cylinders to prevent uncontrolled descent
  • Double wire braided hydraulic hoses
  • Double wire braided hydraulic hoses
  • Polyethylene reservoir allows easy visual check of oil level
  • Maintenance locks built into frame
  • Standard 12′ high lip
  • 28″ W x 38″ L minimum platform size
  • Meets or exceeds the ANSI MH29.2 standard for industrial tilters

Serco S3000HL L-Pad Dock Seal w/ head curtain

It features a modular hood-style head curtain that does not over-compress due to extra projection required on similar competitive models. It is equipped with the standard rugged, roll-formed Serco Steel™ galvanized steel framing.

Design Highlights
  • Standard Side Pad Base Projection: 16″
  • Standard Head Member Base Projection: 12″
  • Standard Base Fabric: 22 oz Vinyl
  • Roll Formed, Galvanized Steel Side & Head Pad Backing
  • Available for Door Sizes Up to 10′-0″ Wide
  • Side Pads Include Two Triangular Support Wedges & Bottom Draft Pads
  • Standard Side Pad Penetration: 12″
  • Maximum Side Pad Projection: 24″
  • Standard 4″ Projection Difference Between Side Pads & Head Member Must Be Maintained for Correct Product Application
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)

Serco S2500G Sliding Head Pad Dock Seal

Our innovative Guardian Foam Dock Seal with Two-piece Movable Head Pad System actually moves vertically with the vehicle, reducing wear on your head pad and side pads, increasing the life of your dock seal. The durable head pad slides up to six inches with the vehicle as it shifts up or down from load weight changes, air-ride suspensions or yard-spotting tractors. This dock seal, constructed of our strongest materials, including roll-formed galvanized steel framing, will enhance seal performance at your loading dock.

Design Highlights
  • Standard Projection Up to 10″
  • Side Pads Have 3” Inside Bottom Flaps
  • Two-Piece Movable Head Pad System with Sliding Front Pad Increases Durability & Service Life of Dock Seal
  • 4″ Exposure Wear Pleats on Side Pads & Head Pad Corners for Protection in Critical Wear Areas
  • 25 oz. Urethane-Coated Base Material Provides Optimum Sliding Surfaces for Maximum Wear Ability
  • Galvanized Steel Backing on Head and Side Pads Reduces Pressure on the Building Wall
  • Self-Drilling Screws through Washers Provide Secure Attachment of Sliding Wear Pleat System
  • Minimum 6″ Bumper Protection Required for Yard Jockey Applications (6″ Steel Face Bumpers Preferrd)
  • 114″ Minimum Unit Width Recommended
  • 93″ Clear Opening Recommended for Cold Storage Applications – Increase Unit Width by 3″
  • Increase “Standard” Unit Height by 6″ When 14′ Trucks Are Present (Western States)